Seed Starting Table

My wife and I have become .  However, we prefer to use the technique.  I just screw together some boxes, mix up the soil, and away we go.  It takes up very little space, and gives us tons of veggies.  Also, being solidly in Zone 4 (as much as I try to convince myself we are in zone 5, it just is not so) having raised beds lets us get our garden in faster.  But, we have this problem in that our house has terrific southern exposure, but no windows on that side of the house.  We have tried starting seeds on a bay window in our living room, but we just don’t get enough light.  My wife was looking at some seed starting benches, where you can move a light up as the seedlings grow, but they were very expensive for the final product.  So, we decided to make one ourselves.  The plan was it had to be cheap and collapsible, since we were only going to use this a few months out of the year.

Our biggest constraint was the light.  Home Depot had a 48 inch shoplight on sale for under 10 dollars, and it would fit indoor plant lights, so that was our basis for our size.  I also wanted to make this, that if we wished, we could put a second bench down below to double our seed starting capacity.  Once I had the width down, the rest fell into place.  The whole thing was made out of five 2x4x8 studs from Home Depot at under $3 each, and three 1x4x8 foot boards from the top of the bench.  I bought two hooks and some chain at Home Depot to support the light, and let us easily adjust the height.  To make sure this was easy to take down and put away for storage, I used a 3/4 inch dowel, and using a , I cut the holes into which the dowels would seat.

support for bench with dowels to lock into place

Bottom of bench to receive dowels

The bench itself is 50 inches by 24 inches with 1×4 boards cut and screwed into place to form the platform to hold the seed trays.

Top of seed starting bench

The support stands are 6 feet tall, with the support for the bench anchored in using 3 inch deck screws at a 36 inch height.  The base of the stand is just a 28 inch piece of 2×4 stud onto the base of the stand and held in place with 1 1/4 inch screws.

Base of stand

The top of the stand has holes drilled to receive the dowel pieces attached to the cross piece that supports the light.

Anchor for cross piece/light support on top of stand

The whole thing can be put up or taken down just by fitting the round pegs into the round holes, and then collapsed back down in easier to store pieces.  It will spend most of the year in our attic, waiting for the next spring.

Bench collapsed and ready to put away

So, this weekend, we will start our seeds, first up, leeks!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

%d bloggers like this: